TephraMod V7
Evolving Member
Joined: Mar 2009
Posts: 256
Likes: 2
From: Trinidad
Newbie
Joined: Sep 2014
Posts: 4
Likes: 0
From: Australia
Newbie
Joined: Feb 2016
Posts: 1
Likes: 0
From: Australia
I've searched high and low, and can't find the answer - I hope someone can help me!
Trying to set up load based boost control on tephramod v7 with gs 3port.
Can anyone verify the corrrect addresses for the below, romid 96260709?
Global Boost Control Type
Variable for Boost Control – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Boost Error RAM Address – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Load Error RAM Address – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
MUT8A – Enter “xxxxxx” for Load based or “xxxxxx” for PSI Based boost control
MUT8B – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Direct Boost
SHLR ->SHLL for EBC – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Trying to set up load based boost control on tephramod v7 with gs 3port.
Can anyone verify the corrrect addresses for the below, romid 96260709?
Global Boost Control Type
Variable for Boost Control – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Boost Error RAM Address – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Load Error RAM Address – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
MUT8A – Enter “xxxxxx” for Load based or “xxxxxx” for PSI Based boost control
MUT8B – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Direct Boost
SHLR ->SHLL for EBC – Enter “xxxxxx” for Load based or “xxxxxx” for PSI based boost control
Last edited by itsali; Apr 13, 2016 at 07:45 AM.
Evolving Member
Joined: Nov 2008
Posts: 424
Likes: 3
From: Russia, Moscow
Newbie
Joined: Nov 2015
Posts: 4
Likes: 0
From: melbourne
i am trying to get tephramod to work on my 03 jdm evo 8 gsr i have map 93660005 and i am trying to use tephra mod 96530706. the issue i have is i can get it to start but not idle it stalls as soon as it fires up. one thing i have noticed is that my original mad is in celsius and tehphra mod is in fahrenheit. the iscv control relys on this does anyone have a conversion or a work around for this issue. any guide or help will be appreciated as i cant wait to get all the options finally running
i am trying to get tephramod to work on my 03 jdm evo 8 gsr i have map 93660005 and i am trying to use tephra mod 96530706. the issue i have is i can get it to start but not idle it stalls as soon as it fires up. one thing i have noticed is that my original mad is in celsius and tehphra mod is in fahrenheit. the iscv control relys on this does anyone have a conversion or a work around for this issue. any guide or help will be appreciated as i cant wait to get all the options finally running
Newbie
Joined: Oct 2012
Posts: 22
Likes: 0
From: Indy
I am preparing to switch over to the Tephramod and the link to the big map translator seems to be broken (see below). Is there a copy stored anywhere else? I would prefer to avoid the manual conversion method.
(https://www.evolutionm.net/forums/7597112-post3.html
(https://www.evolutionm.net/forums/7597112-post3.html
Newbie
Joined: Nov 2010
Posts: 29
Likes: 0
From: Spain
Hi to all
I hope someone could explain what is happening.
I have a Tephra v7 version por Euro evo 9, i can't use the USD version because the Check light is on for the fuel tank evap (euro car hasn't)
Well, i have the ROM 88580714, but when i tuned it and load on the ECU, then i can't recover this ROM or when i opened my saved Map from my laptop. when i read the ecu or reopen the map in the laptop, the ROM is a EDM 88840016
i tried in several EVO 9 and always is the same, i can use the tephra file for the first time, but when i save it with other name or try to recover from the ECU, Ecuflash changes the ROM to EDM 88840016, so any Tephra options are not available, but the car still has all tephra features.
I loaded all the Tephra definitions again on the rommetadata, removed all evo9 XML, but always is the same. If i want change something...i need built a new map from the ROM 88580714 scratch!!!!
I hope someone could explain what is happening.
I have a Tephra v7 version por Euro evo 9, i can't use the USD version because the Check light is on for the fuel tank evap (euro car hasn't)
Well, i have the ROM 88580714, but when i tuned it and load on the ECU, then i can't recover this ROM or when i opened my saved Map from my laptop. when i read the ecu or reopen the map in the laptop, the ROM is a EDM 88840016
i tried in several EVO 9 and always is the same, i can use the tephra file for the first time, but when i save it with other name or try to recover from the ECU, Ecuflash changes the ROM to EDM 88840016, so any Tephra options are not available, but the car still has all tephra features.
I loaded all the Tephra definitions again on the rommetadata, removed all evo9 XML, but always is the same. If i want change something...i need built a new map from the ROM 88580714 scratch!!!!
Last edited by raulhp; May 9, 2016 at 05:04 AM.
Newbie
Joined: Jun 2007
Posts: 16
Likes: 0
From: Sri Lanka
Jdm evo9 89280002
I'm experimenting the TephraV7 ROM 88591715 on a friends race car running a 34mm restrictor as per our racing rules. I'm also attaching the file which I started the car with just incase I have changed something which I shouldn't.
My issue is after a few minutes of engine running it throws a engine check light and on scanning it says "J2534 init error ERR_FAILED" and it keeps coming back immediately after erasing. It also makes the ABS and ACD lights to blink, I wonder if both these issues are related. I have Merlins map loaded on the ACD ecu.
Some input on this issue will be greatly appreciated.
Zakie
Sri Lanka
My issue is after a few minutes of engine running it throws a engine check light and on scanning it says "J2534 init error ERR_FAILED" and it keeps coming back immediately after erasing. It also makes the ABS and ACD lights to blink, I wonder if both these issues are related. I have Merlins map loaded on the ACD ecu.
Some input on this issue will be greatly appreciated.
Zakie
Sri Lanka