I have a question. In the PDF instructions it says to make sure you are using alternative maps. What exactly is this referring to? Does it mean using a modded rom like tephra or does it mean using the alt maps in tephra or something completely different? Sorry for my ignorance if its something obvious that I'm overlooking. Most of the time I have tried to tinker with my car its while trying to watch a 2yo and a 5yo playing in the yard lol.

 

You need to use alt maps in Tephra.

 

Ahh got ya. So safe to say just copy main info into alt info to start?

 

Exactly. Then switch to alt map after flashing

 

Gotcha thanks for the quick replies!

 

ziad I turned on the "enable SD" but then when I click on the start logging I get an error that say Exception index not greater than zero.... (i tried on my way to work) so didn't look over it too much do I need to set a map index some where? I'll look more myself on the way back home but thought I'd ask for an easy answer
cheers

Andy

 

ELM and Evoscan are reporting 22.3 AFR with the engine not running but ignition on. Logworks shows a 20.8 which would be the correct value. Any ideas? Scaling correction maybe?

 

Logworks is mostly likely showing the % O2 that the XD-16 gauges show for the LC1. It switches from AFR to %02 when free air is flowing.

 

Yep, that sounds right, donner said the same and my test with the engine running showed the AFR on the LC1 the same as ELM with the original scaling. I wanted to be sure as I'm trying to tune 3D SD and dailing in the AFR on my own is not that easy, especially at part throttle off boost. I'm running full time open loop to get the VE correct.

 

andy i dont know, it could be that you are missing a request or two. make sure u have MAP defined and its in KPA. also make sure u have a VE table defined too. i dont remember if i did a check for them or not.

 

this is the xml that I use if it helps

Andy

 

andy i will look at ur problem. but until then how about this little update

let me know if u guys want me to make them even bigger.

 

looks good what size is the resolution of your screen

 

1366x768 mate. the test on the main buttons is 8.25 size, while the text for the requests is 14.. i will see how it looks and might increase it a little.

andy, i will publish a new version, try that and let me know how u go.

 

great many thanks