Mods are in sig with the addition of an Ets 3.5" IC and ic piping. The power I made while getting tuned was on 23lbs. Is 24 or 25 lbs too much? I do want to still be totally safe as well!

 

Anyone bump

 

stay at 23... i stay at 21 becuase i wanna be super safe... but its ur ride so its ur call

 

You will be fine at 25. You might pull some timing but you won't damage anything. Your choice.

 

well what did your tuner say? If you are tuned for 23 stay there unless you get re-tuned for the higher boost.

 

depends on your tune.

 

Run whatever you are tuned for...usually varying 1lb either way isn't going to matter...some tuners say up to 2...

 

Tuner said he did'nt wanna runner higher than 23 I believe because of the IC . My Defi boost gauge is set @ 23 n 1/2 lbs. but I don't ever hit it, but don't defi gauges run a little high, i.e, it's set at 23 n 1/2 but actual boost might be 22lbs?

 

pump gas stock turbo stock ecu 21-23 psi is fine with ur mods

 

i would stay at 23 if your on 91 octane gas may opinion i mean you prob wouldnt hurt anything bumping it to twenty five but might get some knock here and there your call i think twenty three is perfect on 91

 

Running 93 currently until I move back home to Norcal then 91. Had zero knock @ 23 lbs. but I am going to get retuned when I put the IC n piping on and hard intake pipe as well. Kinda leaning towards 24 lbs. Would like to get to 380awhp and 350lb ft. with the new mods and tune.

 

with 93 you can easily run 25 psi imo. I'm at 26, tapering to 22-23 at 7K!
gl