Another quiet exhaust project (BluEVOIX and beyond)
#121
That was when I was running a black, but now I'm running a BBK at 27 psi. The Black set-up did over 500 whp on VD on 93 and hit 20 psi around 4100 rpm in 3rd on a 2.0. I can't remember when it hit 30 psi, but it was just a few hundred rpm more. It was knock free with the cutout open. I just decided to get a smaller setup for autocross, though I haven't done as many events as I had hoped this summer.
#124
Evolved Member
iTrader: (12)
I'm running a boost actuated cutout as well. Except I set mine up at the test pipe. I'm running this cutout with the stock catback. This has been by far the best thing I could have done to this car! I love how quiet it is.
Sound Performance makes this valve. It starts to open at 5 psi and is fully open by 11 psi.
Here are some pics:
Sound Performance makes this valve. It starts to open at 5 psi and is fully open by 11 psi.
Here are some pics:
#125
Evolved Member
iTrader: (42)
Join Date: Dec 2005
Location: somewhere
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to the y pipe I used. The flange wasn't exactly the same as what the cut is, so my local exhaust shop removed and replaced it with the correct one:
http://cgi.ebay.com/ebaymotors/Magna...#ht_4439wt_940
Thread
Thread Starter
Forum
Replies
Last Post
BluEVOIX
Evo Engine / Turbo / Drivetrain
197
Apr 10, 2021 05:05 AM
04Evo851374
Evo X General
20
Dec 27, 2012 05:53 PM
FERNO
Evo Engine / Turbo / Drivetrain
295
Jan 30, 2012 10:31 AM