Squash Performance Evo 7/8/9 Fuel System - tester needed ASAP
EvoM Guru
iTrader: (50)
Joined: Mar 2006
Posts: 9,675
Likes: 132
From: Tri-Cities, WA // Portland, OR
Mychalo, is your friends a more recently built one or an early one?
I know that Andy had some issues with the first units and the pumps being down to far. I believe he mounted them higher after that.
To my recollection the pump would need to be moved higher. I think the PIA with that is just shortening the fuel line from the top of the pump to the hanger. The bracket can be loosened and slide the pump up a bit.
Correct me if I am wrong but that is what I remember of the assembly.
I know that Andy had some issues with the first units and the pumps being down to far. I believe he mounted them higher after that.
To my recollection the pump would need to be moved higher. I think the PIA with that is just shortening the fuel line from the top of the pump to the hanger. The bracket can be loosened and slide the pump up a bit.
Correct me if I am wrong but that is what I remember of the assembly.
Last edited by mrfred; Jun 24, 2014 at 07:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post
240Z TwinTurbo
Vendor Service / Parts / Tuning Review
37
Dec 9, 2018 08:16 PM
240Z TwinTurbo
Vendor Service / Parts / Tuning Review
8
May 4, 2013 12:49 PM



