Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

400WHP mods need you to check the list

Thread Tools
 
Search this Thread
 
Old Oct 31, 2012 | 06:44 AM
  #31  
NODAKevo's Avatar
Evolving Member
iTrader: (1)
 
Joined: Apr 2012
Posts: 111
Likes: 2
From: Vail, Colorado
Boost farmer - No street racing videos are not permitted on the site. You are welcome to keep it a personal video and send people a pm a link if they request to see, but on the site the mods will remove it. I recommend that you wait for a track day to take him on, you will get better traction yourself and should cut a nice 60' which wont hurt. Then all you would have to do is hold him off to the line (highway runs, he will run you down eventually). And there would be more people to witness it at the track!

cursedsm - haha yeah for the turbo, but any immediate lead helps in the 1/4 in a closer type of race! haha

Just get the FP Green or Red turbo, then you can post closer to 430-470hp with the supporting mods without having to touch the bottom end. Good luck man.

Last edited by NODAKevo; Oct 31, 2012 at 06:46 AM.
Reply
Old Nov 1, 2012 | 01:55 PM
  #32  
Boostfarmer's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Oct 2012
Posts: 118
Likes: 0
From: Mesa
What if its filmed in mexico? Lol ahhh I feel like he'll put on his slicks if we go to the track =( that just adds more problems lol. Way to make it even more of a challenge =)
Reply
Old Nov 1, 2012 | 02:12 PM
  #33  
IRISHEVOX's Avatar
Evolving Member
 
Joined: Apr 2012
Posts: 232
Likes: 0
From: Whidbey Island Washington
i don't agree 100% with this list... mostly right but you don't need CAMS or E85 or fuel pump....
my Mods
ETS 4"Intercooler
ETS intake
ETS Uicp
Synapse BOV
CNT Racing Exhaust(turbo back)
Grimmspeed boost Controller
Garrett GTX Turbo
COBB AP



Originally Posted by Boostfarmer
OK Im looking to hit 400whp and then sit on it a little while

Its a evo 8 year 03

MODS
Evo 9 turbo
BSC stage 2 cams
BSC beehive springs
Muse licp
02 megan housing
Full 3 inch TBE
3 inch Intake
1000cc Injectors E85
255 Fuel pump

Think I can hit it? Im looking at trying to beat a friends 2011 shelby GT. He has exhaust and a smaller pulley and dyno'd at a little over 600 and 570 tq. Id feel id have a chance at 400 from a dig with a good launch?
Reply
Old Nov 2, 2012 | 01:20 PM
  #34  
LacouK600's Avatar
Newbie
 
Joined: Jul 2012
Posts: 45
Likes: 0
From: So. TX
You should be able to make over 400hp with those mod's. Car just needs a good tune. I would get a bigger Fuel pump and maybe think about running E85. With E85 running a TME EVO 9 Turbo I made 410hp 458Torq. The E85 made a huge difference! And I am running a 340 Stealth Pump and 1450cc FIC BlueMax Injectors with a AMS Fuel Rail. Shouldn't cost you a arm and leg to upgrade you fuel system.

Also I made that Wheel HP at 32psi with E85 on a Mustang Dyno.
Reply
Old Nov 2, 2012 | 04:01 PM
  #35  
CurseDSM's Avatar
EvoM Guru
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (3)
 
Joined: Sep 2009
Posts: 3,588
Likes: 298
From: Pinckney, Michigan
Originally Posted by Boostfarmer
so noob question is 400tq dangerous for the life of my car? I hear a lot of people say 400 and over is bad. I have read a lot and Ive been in a evo that was 389tq to the wheels and omg it sucked you back in the seat so hard I bet id lose a 100 dollar bill test.
Sorry I have been away from the computer for a few days damn midnites, but you can do over 400 tq on stock block if the car is tuned properly with it. I am still on a stock block and I am over 450tq.

Originally Posted by IRISHEVOX
i don't agree 100% with this list... mostly right but you don't need CAMS or E85 or fuel pump....

my Mods

ETS 4"Intercooler

ETS intake

ETS Uicp

Synapse BOV

CNT Racing Exhaust(turbo back)

Grimmspeed boost Controller

Garrett GTX Turbo

COBB AP

I disagree with your setup list aswell specially if you say you don't need a fuel pump. If you safely wanted to do anything fuel pump is and should be one of the first mods. Plus you really don't need to upgrade turbos to make 400whp specially since there are a ton of people making that kinda power on stock turbos with a few extra things. It's a matter of finding the right combos for the setup.

Originally Posted by evobros
Ok well my car only made 350wtq and his cobra made 500wtq and I still beat him from a 20-125mph roll. I posted the video earlier idk if any of you guys saw it

Not to say it wouldn't happen, but I do know what cars with 500tq feel like it and what the evos can do and if you beat him 25 to 125 he didn't have 500 tq in that mustang. Trust me when I say cars with that much tq and power even at a roll pull very very hard and the responce is instant. For an evo to pull as hard and as fast as a v8 I just don't see it. Video or not, that mustang didn't have the power he said.

Last edited by CurseDSM; Nov 2, 2012 at 04:10 PM.
Reply
Old Nov 2, 2012 | 07:10 PM
  #36  
evobros's Avatar
Evolving Member
iTrader: (25)
 
Joined: Sep 2008
Posts: 460
Likes: 3
From: CA, 90303
Originally Posted by cursedsm
Sorry I have been away from the computer for a few days damn midnites, but you can do over 400 tq on stock block if the car is tuned properly with it. I am still on a stock block and I am over 450tq.




I disagree with your setup list aswell specially if you say you don't need a fuel pump. If you safely wanted to do anything fuel pump is and should be one of the first mods. Plus you really don't need to upgrade turbos to make 400whp specially since there are a ton of people making that kinda power on stock turbos with a few extra things. It's a matter of finding the right combos for the setup.




Not to say it wouldn't happen, but I do know what cars with 500tq feel like it and what the evos can do and if you beat him 25 to 125 he didn't have 500 tq in that mustang. Trust me when I say cars with that much tq and power even at a roll pull very very hard and the responce is instant. For an evo to pull as hard and as fast as a v8 I just don't see it. Video or not, that mustang didn't have the power he said.
Haha your funny, I was there when he dyno'd his cobra and also have video of him dynoing those number. We raced from a first gear roll and I was brake boosting so as soon as we hit third honk I was at 23psi so I had absolutely no lag.
Reply
Old Nov 2, 2012 | 08:09 PM
  #37  
Boostfarmer's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Oct 2012
Posts: 118
Likes: 0
From: Mesa
claim down claim down lol thanks a lot for your help Im getting the last bit of my mods togather. Ill get them installed some time next week and keep the stock clutch to practice my launches rather then practice on a new clutch. I really want to do a dig with him that way a got a slim chance. I think from a roll at 600whp ill be creamed now hearing what you guys say and some youtube videos. So ill post a video and say it was filmed in mexico or post a link to it to youtube if thats ok with mods?
Reply
Old Nov 2, 2012 | 08:12 PM
  #38  
Boostfarmer's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Oct 2012
Posts: 118
Likes: 0
From: Mesa
O and sorry for the update I forgot I do have a 255 in the car and getting a 1450cc FIC bluemax injectors
Reply
Old Nov 2, 2012 | 10:04 PM
  #39  
CurseDSM's Avatar
EvoM Guru
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (3)
 
Joined: Sep 2009
Posts: 3,588
Likes: 298
From: Pinckney, Michigan
Originally Posted by Boostfarmer
O and sorry for the update I forgot I do have a 255 in the car and getting a 1450cc FIC bluemax injectors
Get the high z the ones I have in my car suck
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbodreamz21
Evo X General
50
Jan 28, 2019 11:54 AM
soderdna
Evo Engine / Turbo / Drivetrain
34
Feb 19, 2016 12:19 PM
Boomba Racing
Evo X Dyno Results
32
Feb 8, 2011 09:05 PM
bsc7080emn
Lancer Audio and Security (All models)
2
Aug 8, 2007 04:41 PM
bsc7080emn
Lancer How Tos / Installations
5
Apr 13, 2007 11:43 AM




All times are GMT -7. The time now is 11:57 PM.