Sorry, nope :-( I tried with a few other JDM parts, but it just isn't happening yet.

 

part # for OEM brake pad shims

 

Front brakes:

Pads: MR407376 $199.94
Shim set: MR475618 $19.66
Clip set: MR475935 $39.50

Rear brakes:

Pads: MR407391 $199.94
Shim set: MR493188 $4.18
Clip set: MR475936 $6.82

All of which I have in stock.

 

Part number for the two bolts that hold up the triangle shaped exhaust hanger.
Thanks!

 

what are the clips?

Also would you mind providing me with the part numbers for all gaskets and washers necessary for a TME turbo, o2 housing, and exhaust manifold install? thank you

 

Hi Guys!!! I need to know the part number of the EVO IX front nose mask.

Thanks in advance

 

MF243661

 

The part numbers that say "clip set" have the clips in them. As for your gasket list, are the TME ones and the oem ones the same?

 

Mitsu does not have one yet. Just checked on that yesterday actually.

 

But what are the clips, got a pic? The GT spec exhaust manifold and invidia o2 housing uses the OEM gaskets, and the TME too, also they reuse all OEM washers for all the lines. The problem is I don't have part numbers for everything

 

https://www.evolutionm.net/forums/at...1&d=1166127722

https://www.evolutionm.net/forums/at...2&d=1166127730

The clips are the 3rd box down, all the way to the right. As for the gaskets, you would need all the part numbers for a IX right?

 

Ok thanks a lot for your reply!!! Also..they told you when release these part??

Thanks in advance,Javier

 

No prob, and unfortuantely, nothing as of yet.

 

Do you know if there are a double din radio dash panel for the evo ix??

 

oh those spring things, I need all the part numbers for gaskets and washers for a 2004 VIII GSR