ECUFlash 1.40 is out!!!
No luck here. I get the following message when i try to read the rom.
[00:03:01.515] Flashing tools do not recognize flash method 'mitsucan'
What version of ecuflash are you running??
[00:03:01.515] Flashing tools do not recognize flash method 'mitsucan'
What version of ecuflash are you running??
Trending Topics
Thread Starter
Evolved Member
iTrader: (1)
Joined: Jun 2008
Posts: 1,018
Likes: 0
From: Kanagawa, Japan
Not bad at all, it can log for up to 15 min and you can hook up an external wide band that outputs 0-5v. I have my AEM WB hooked up to it and it works fine.
The only downside is that it cannot output the log to any external device. You can only view it on the monitor itself and it gets erased if you turn the car off. The peak hold and settings remain but the recording log gets erased.
The only downside is that it cannot output the log to any external device. You can only view it on the monitor itself and it gets erased if you turn the car off. The peak hold and settings remain but the recording log gets erased.
Have you been able to write with 1.40.2173? Ive tried to modify the rpmlimit but the car wont start when I write the modified rom. I am able to write the original rom back in successfully though. Thank god.
Piggybacks are NEVER equivalent to a properly reflashed ECU. They may be able to make similar power, but the consistency is poor in comparison. If you want to race on a dyno they are fine. Also, eventually piggies fade into obsolescence as the tuner picks a newer platform to use for their piggyback unlike ROM flashing which continues development. Been there done that man, I have a very very expensive Xede for a paperweight from my Evo. In shorter time than people realize, the same will be true of the piggies for the X. Patience is a virtue. Wait or get an ECUtek flash.
Last edited by Noize; Oct 21, 2008 at 08:33 AM.
Piggybacks are NEVER equivalent to a properly reflashed ECU. They may be able to make similar power, but the consistency is poor in comparison. If you want to race on a dyno they are fine. Also, eventually piggies fade into obsolescence as the tuner picks a newer platform to use for their piggyback unlike ROM flashing which continues development. Been there done that man, I have a very very expensive Xede for a paperweight from my Evo. In shorter time than people realize, the same will be true of the piggies for the X. Patience is a virtue. Wait or get an ECUtek flash.
+1
Zchip promotion in this thread is unwanted and has been removed, as this is an Ecuflash thread. If you want to talk about chipping your car, use the appropriate thread already in this forum.