I am in the process of rebuilding the engine, and will be running E-85
Mods below.
1. FP Red
2. AMS Widemouth 02/Downpipe
3. Cossworth MX1 Cams
4. ACT Heavy Duty Clutch
5. Upper and Lower Intercooler Pipings
6. AGP Intercooler
7. AEM Intake
8. 3 inchTest Pipe and Cat Back Exhaust
9. ARP Head Bolts Set
I talked to my tuner, he said he will put a base map on it just to be safe.
How much whp and wtq should I get on 91 fuel with the above mods?
Mods below.
1. FP Red
2. AMS Widemouth 02/Downpipe
3. Cossworth MX1 Cams
4. ACT Heavy Duty Clutch
5. Upper and Lower Intercooler Pipings
6. AGP Intercooler
7. AEM Intake
8. 3 inchTest Pipe and Cat Back Exhaust
9. ARP Head Bolts Set
I talked to my tuner, he said he will put a base map on it just to be safe.
How much whp and wtq should I get on 91 fuel with the above mods?
Evolved Member
I think the usual answer is: depends on the dyno.
What do you have for fueling? If you are running a single Walbro on E85 then that'll be what limits you next. They max out in the mid-400's on the liberal dynos.
What do you have for fueling? If you are running a single Walbro on E85 then that'll be what limits you next. They max out in the mid-400's on the liberal dynos.
Evolved Member
Arch you said you are switching to E85 but asked what you would make on 91. If you are running 91 I would have stuck with the stock turbo.
Account Disabled
you said you were building your engine. What parts did you end up going with? Choosing the right internals is very important on any build like this. Feel free to let me know if I can help answer any questions.
thanks
Marti
thanks
Marti
Not sure on 91 fuel though, should still be solid.