Look into getting t-bolt clamps. Much nicer than those worm drive ones, but have to be careful not to crush your piping since yours is aluminum.

I keep breaking my worm drive ones.

 

Agreed I got mine from www.fastenal.com I paid 25 for 4 and I already had 2 their stainless band clamps

part # 0427816

 

I want that manifold...no cash though. Gotta buy a new $100 tire

 

lol well my left headlight wont come on now, but when i put the brights on it comes on...

 

yur low beam is out. you have a 9007 bulb which is a dual filiment bulb. hence in forth yur low wont work but yur high will. go to yur local auto parts store and get a new one!

josh

 

lol I just read that on a mazda forum, well looks like im going to get those blue headlights that are really bright thanks josh I was about to tear under the dash board tomorrow

 

I bought a spoiler about a week ago and Im making the final payment this week, its an evo 8 wing, does anyone know a proper way to install it on an ES so i dont puch holes where there not suppose to go?

 

it should just bolt to the factory outside ones if im not mistaken...

 

ES doesn't have a stock wing though I think.

The ideal thing is to get a trunk and wing, so it's already mounted....though I know that doesn't help you. just be careful when mounting it, and measure 3 times, drill once I guess. What sort of mounting hardware did it come with?

 

also to go off what the other two said on the t-bolts here a good place to get the whole kit for the evo ic piping http://www.siliconeintakes.com/produ...98373ad557bd1f

and yes the es doesnt have a spoiler unless i was an option, i think 03lances has an es with an oz spoiler if im not mistaken
edit: yea he does have one not sure if he added it or got it like that

 

Thanks Link, I'm getting those! Even with my cold air intake, I still had worm gear clamps fall off. I really don't want to have that sinking feeling when all the sudden something pops off, and you think the engine just "ate" itself.

 

Correct I put the spoiler on. Well I bought the spoiler and when I had my car painted I had them install the spoiler too so I cant much help you with the install other than most come with templates for drilling the holes no?

 

I just had to take a coupler to my bench grinder and give it a little groove for the clamp to seat into cause the damn thing popped off 3 times in like 5 minutes the other day tuning. I was the IC hose that comes directly off the J pipe. No more popping off now though solid as a rock

 

I know where it mounts If its a stock evo wing steven , unscrew the rubber trunk bumpers from the inside ,

drill 2 small holes in the center of where the bumpers screw in big enough for your wing bolts thats where the evo is mounted,

once you have those 2 set the wing into those 2 holes and mark the other 2 front ones ...

the other 2 sit on the outside of the trunk lid frame , if you have the trunk open you'll see 2 half circle cutouts in the metal bracing right where your front wing bolts are you'll wanna drill the holes dead center of all those

 

And you could probably hold the wing up to the trunk with the trunk open and verify from the inside if that would work, right? before drilling holes just to make extra sure.