Notices
Northeast Region Includes CT, MA, ME, NH, NJ, NY, PA, RI, VT.

Local Pittsburgh meet part deux

Thread Tools
 
Search this Thread
 
Old Apr 18, 2011 | 09:48 AM
  #6751  
travman's Avatar
Evolved Member
iTrader: (26)
 
Joined: Oct 2005
Posts: 1,712
Likes: 0
From: Pittsburgh
finally caved....wife and i picked up this, will need a lift kit on the brick mobile home to fit it.

Reply
Old Apr 18, 2011 | 10:00 AM
  #6752  
travman's Avatar
Evolved Member
iTrader: (26)
 
Joined: Oct 2005
Posts: 1,712
Likes: 0
From: Pittsburgh
Originally Posted by metalsaber
Did someone here say they were using the Zeitronix ZT-2 Wideband?


No matter what is done with the tune, it's showing lean at WOT. Even with it's running rich it's showing 13s. Already changed o2 sensors with no change. Now thinking the device itself is bad.

I thought if someone else was running this wideband, we might be able to meet up and possibly try out mine in your car or other way to see if the unit is bad.
Check your ground to the unit......
Reply
Old Apr 18, 2011 | 05:23 PM
  #6753  
MR. Tim's Avatar
Evolving Member
iTrader: (11)
 
Joined: Sep 2007
Posts: 432
Likes: 1
From: Greensburg, PA
Looks good Travis! Are you going to use all that snazzy off road equipment?
Reply
Old Apr 19, 2011 | 09:41 AM
  #6754  
EvoIan's Avatar
Newbie
iTrader: (1)
 
Joined: Aug 2006
Posts: 64
Likes: 0
From: Pa
Obvious question time:
Are you sure you are logging the correct value?
Reply
Old Apr 19, 2011 | 09:46 AM
  #6755  
metalsaber's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jun 2009
Posts: 1,247
Likes: 2
From: The Sticks
Yup. As stated, it's the same as whats showing on the LCD at the time and that hasn't changed since it was installed. It worked perfectly all last year. Just after getting everything done this winter and attempting to do the tune did it not work.
Reply
Old Apr 19, 2011 | 10:34 AM
  #6756  
Oki Panoki's Avatar
Evolved Member
iTrader: (8)
 
Joined: Sep 2007
Posts: 1,019
Likes: 0
From: Baltimore, MD
^checking the ground sounds like a good idea. if that also does not work, after further consideration, i reckon clogged injectors
Reply
Old Apr 19, 2011 | 03:17 PM
  #6757  
EvoIan's Avatar
Newbie
iTrader: (1)
 
Joined: Aug 2006
Posts: 64
Likes: 0
From: Pa
Originally Posted by metalsaber
Yup. As stated, it's the same as whats showing on the LCD at the time and that hasn't changed since it was installed. It worked perfectly all last year. Just after getting everything done this winter and attempting to do the tune did it not work.
Ah, I missed that.

I dunno what you changed since last year, and whether your tune would be that far off. Seems too consistent and not high enough flow and to be a fuel pump or clogged injectors IMO.

Could there be an exhaust leak?

I would offer to swap, but my unit is buried in the center console and the wiring is neatly tucked (taggers have fun with this one)
Reply
Old Apr 20, 2011 | 04:24 AM
  #6758  
metalsaber's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jun 2009
Posts: 1,247
Likes: 2
From: The Sticks
In terms of performance parts, just the full race header and GSC S2 cams + Springs
Reply
Old Apr 20, 2011 | 01:26 PM
  #6759  
xsolowx's Avatar
Evolving Member
iTrader: (8)
 
Joined: Oct 2007
Posts: 152
Likes: 3
From: Pittsburgh, PA
we should have a meet...its been a while...
Reply
Old Apr 20, 2011 | 02:00 PM
  #6760  
mullen's Avatar
Evolved Member
iTrader: (10)
 
Joined: Feb 2008
Posts: 1,087
Likes: 0
From: the moon
Spotted an as 8 on carson street yesterday...anyone from here?
Reply
Old Apr 20, 2011 | 04:06 PM
  #6761  
gt420hp's Avatar
Evolving Member
iTrader: (5)
 
Joined: Jun 2005
Posts: 203
Likes: 0
From: Pittsburgh & Herndon
Flashlight drags open May 7

Looks like they have a new place up near Mercer to race.

http://www.flashlightdrags.com
Reply
Old Apr 20, 2011 | 04:58 PM
  #6762  
metalsaber's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jun 2009
Posts: 1,247
Likes: 2
From: The Sticks
Haven't been to the sunset dragstrip in a long time. I thought they closed that place down a long time. At least it's an actual 1/8 mile drag strip
Reply
Old Apr 20, 2011 | 06:56 PM
  #6763  
gt420hp's Avatar
Evolving Member
iTrader: (5)
 
Joined: Jun 2005
Posts: 203
Likes: 0
From: Pittsburgh & Herndon
I plan on going, I don't have any of my parts on yet, still waiting for the GSC S2 cams to show up....

Never heard of the track, but I like going to places I haven't seen before, plus its probably a shorter drive for me than going to Waynesburg
Reply
Old Apr 20, 2011 | 07:35 PM
  #6764  
metalsaber's Avatar
Evolved Member
iTrader: (9)
 
Joined: Jun 2009
Posts: 1,247
Likes: 2
From: The Sticks
It's up my way. You could always stop up and pick me up. Haha
Reply
Old Apr 20, 2011 | 08:14 PM
  #6765  
gt420hp's Avatar
Evolving Member
iTrader: (5)
 
Joined: Jun 2005
Posts: 203
Likes: 0
From: Pittsburgh & Herndon
lol I might have to if you don't get your tune squared away....
Reply



All times are GMT -7. The time now is 07:37 AM.