@jakgal04 I appreciate that. Just bought the same unit with mito-03 and scantools' bt obd2 adapter.

 

https://www.ebay.com/itm/201595925109 that is the unit i have and they send me a canbus so i did not had to buy the mito-03.

 

So the canbus connects the RF sub?

Gotta say, that's a pretty sweet looking system. 1.6GHz and 16GB of ram, tha twould solve most issues people seem to have with the underpowered units.

 

yes the canbus is to be used with the RF System. AMP, SUB etc.

i dont know a lot of MIto 02 or 03 since i dont have one. In the last update there is a setting that can be set to canbus with amp and for me works better than before with that configuration. Now im beyong happy with the unit.

i run basically everything i had on the stock unit, plus all the benefits of been and android device.

i can press a button and say navigate to starbucks and the unit will pull google map to it LOL.

 

As of right now. Unit is installed with no audio. I didn't have the time to connect the Mito-03 to the system to get sound working properly. I will need to read up more to see what's required. That being said, this unit doesn't seem to be able to connect to the 50$ obd2 adapter that I got for torque app.

More updates to come.

Thanks

 

Plug the ELM327 to the odbii and go to settings Bluetooth then click on refresh, you will see the ODBIIclick on it and then click pair.
then go to torque and select the right id

 

So, the unit I have isn't the ELM327 unit. I actually have the scan tool obdlink LX. The unit sees the unit but is unable to connect/pair. That's my current issue. I bought this obdlx device because of warranty and compatibility with torque. :/

 

When you go to the android Bluetooth settings and refresh to scan do you see it? Let me know what MTCD verison you have, did you try to update to the latest version?

here is a video of my torque eith ELM327
https://youtu.be/7BknC6A9i4U

 

So the head unit sees the Bluetooth device. It just can't seem to pair to it.

Please see photo for version.

 

Update to the december one if you can.

also on the settings enter 126 there is a Bluetooth section, there are 2 modules there try the other one if the first one is acting up. I posted the update a few post ago.

 

In another note, if you have the oem Bluetooth disconnected it.

 

Upgraded the OS. Definitely connects now but no dice in getting the app to read it. Will fully test everything tomorrow

 

Good to hear, in torque it should show the id.

 

There are some Bluetooth OBD2 adapters that just don't work with Torque. After the update my cheap $10 one is working (Foseal). It might just be hit or miss with which one you have.

I Just did the update as well - and now it's finally connected, not just paired, with the OBD2. For some reason, the Torque app still shows "Bluetooth not enabled" in the adapter settings, but it is connected and reading from the ECU. I guess the update is all I needed.

 

Yeah since i read about it i started to play with my working torque app and noticed the same behavior, but still works LOL. Will try to reinstall my torque app.