Notices
West Region Includes AZ, CA, HI, NV, UT.

Utah Evos

Thread Tools
 
Search this Thread
 
Old Jan 27, 2009 | 10:33 AM
  #19846  
gear head's Avatar
Evolving Member
iTrader: (3)
 
Joined: Sep 2005
Posts: 333
Likes: 0
From: Utah
Originally Posted by Jay644
I wish I knew someone with a cable anyone willing to share for a small fee?
I would buy the evoscan cable if I hadn't read all the problems people have been having with them.
If you are close to the Ogden area I don't mind pulling the ROM so you can send it off.
Old Jan 27, 2009 | 10:52 AM
  #19847  
wesside's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2006
Posts: 973
Likes: 1
From: Slc Utah aka SL,UT
Originally Posted by mountainturbo
Definately interested. I need to re-tune with my cams soon, and re-tune boost (I do have the JDM boost sensor). I've been thinking of adding no-lift shift too, but don't know if I want to put that much strain on my tranny/diffs
If you haven't retuned the car since the cams then you should, you can run some more boost and I'd set your redline to 7800. Only time you'd need NLTS is when your at the drag strip and **** when I'd go to the drag strip I'd just flat foot **** it, I can shift plenty fast enough I never even used it to be honest but hey it's included in the tephra patch so I've used the valet mode before Pretty cool stuff but once time by accident when I was putting in a new tranny and bleeding the acd I went to drive it and was like wtf is going on

Originally Posted by Jay644
I wish I knew someone with a cable anyone willing to share for a small fee?
I would buy the evoscan cable if I hadn't read all the problems people have been having with them.
tactrix cable Just get someone in the area to help ya out

Originally Posted by MPACT
I have been doing quite a bit of logging with Evoscan recently and I keep getting gaps in my full throttle logs, it will log great from 2500-4000 then jump to 7000 on one log and then the log from 4-8k on one log, I can't seem to figure out why it keeps disconnecting. Any one have any ideas? It seems to happen mainly on FT logs as I can log a 30mi trip home without any disconnects
Your in Cedar not too far from me. What version of evoscan you running? I ran v.99 for ever and wasn't until a few months ago updated to v2.5. I could hookup my laptop to your car
Old Jan 27, 2009 | 10:54 AM
  #19848  
wesside's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2006
Posts: 973
Likes: 1
From: Slc Utah aka SL,UT
Originally Posted by gear head
Here you go....

I just included all the files to make it easier

EDIT: the 96940011_MOD file is for the V4 Tephrapatch
the 96530006_MOD file is for the v5.10 Tephrapatch
I still don't see the 96530006 rom just the xml files
Old Jan 27, 2009 | 11:01 AM
  #19849  
gear head's Avatar
Evolving Member
iTrader: (3)
 
Joined: Sep 2005
Posts: 333
Likes: 0
From: Utah
Correct, the xml files are only for viewing the tables in ecuflash

The ROM can be downloaded here in the first post....

https://www.evolutionm.net/forums/ec...d-v5-10-a.html

Last edited by gear head; Jan 27, 2009 at 11:04 AM.
Old Jan 27, 2009 | 11:04 AM
  #19850  
Jay644's Avatar
Evolving Member
iTrader: (7)
 
Joined: May 2008
Posts: 138
Likes: 0
From: Utah
Originally Posted by gear head
If you are close to the Ogden area I don't mind pulling the ROM so you can send it off.
I'm actually in Ogden and in West Haven also.
Old Jan 27, 2009 | 11:10 AM
  #19851  
MPACT's Avatar
Newbie
iTrader: (5)
 
Joined: Dec 2003
Posts: 71
Likes: 0
From: Las Colinas, TX
I have tried each of the 3 USB ports on my laptop with similar results but maybe I will try a different machine. I am on v2.6b and I have only the basics logging and it is actually disconnecting. I can use ECUFlash ok it would seem but logging it cuts out. It isn't 100% of the time but it is quite often. Makes it really maddening to try and tune this thing if I can't get a FTL log!

I am in Cedar Hills (UT County) no Cedar City sorry
Old Jan 27, 2009 | 11:10 AM
  #19852  
gear head's Avatar
Evolving Member
iTrader: (3)
 
Joined: Sep 2005
Posts: 333
Likes: 0
From: Utah
Ok, if you want to meet up when you're ready I can download it for you....only take about 20sec.

Last edited by gear head; Jan 27, 2009 at 11:13 AM.
Old Jan 27, 2009 | 11:12 AM
  #19853  
gear head's Avatar
Evolving Member
iTrader: (3)
 
Joined: Sep 2005
Posts: 333
Likes: 0
From: Utah
Originally Posted by MPACT
I have tried each of the 3 USB ports on my laptop with similar results but maybe I will try a different machine. I am on v2.6b and I have only the basics logging and it is actually disconnecting. I can use ECUFlash ok it would seem but logging it cuts out. It isn't 100% of the time but it is quite often. Makes it really maddening to try and tune this thing if I can't get a FTL log!

I am in Cedar Hills (UT County) no Cedar City sorry
I wonder if it's a bug in 2.6..I'm on 2.5 & haven't had any problems like that.
Old Jan 27, 2009 | 11:32 AM
  #19854  
Jay644's Avatar
Evolving Member
iTrader: (7)
 
Joined: May 2008
Posts: 138
Likes: 0
From: Utah
Originally Posted by gear head
Ok, if you want to meet up when you're ready I can download it for you....only take about 20sec.
Awesome, I'll let you know when I'm ready to go, should be around the beginning of march.
Old Jan 27, 2009 | 11:37 AM
  #19855  
MPACT's Avatar
Newbie
iTrader: (5)
 
Joined: Dec 2003
Posts: 71
Likes: 0
From: Las Colinas, TX
Maybe, I have both versions installed. Maybe I will try using 2.5 to run some logs.
Old Jan 27, 2009 | 02:17 PM
  #19856  
33's Avatar
33
Account Disabled
 
Joined: Dec 2007
Posts: 20
Likes: 0
From: SL, UT
Anybody interested in hitting up Hooter's Friday after work?
Old Jan 27, 2009 | 03:14 PM
  #19857  
Evolution IVGSR's Avatar
Evolved Member
iTrader: (42)
 
Joined: Dec 2006
Posts: 1,720
Likes: 1
From: Utah, SLC
Originally Posted by 33
I have a pic of a RR X on my desktop here at work and damn, I hate to say it, but the look of them has been growing on me alot.
hahahaha YES GIVE IN MAN Do it you know you want one and want a reliable car and hey 0% for 60 months man
Old Jan 27, 2009 | 03:19 PM
  #19858  
wesside's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2006
Posts: 973
Likes: 1
From: Slc Utah aka SL,UT
Originally Posted by MPACT
Maybe, I have both versions installed. Maybe I will try using 2.5 to run some logs.
Haha my bad thought it was the hills in cedar city or something

Anyway man don't have both installed, what I would do is uninstall both then install 2.5 just cuz computersome things can be touchy. 2.4 did weird stuff on me
Old Jan 27, 2009 | 03:21 PM
  #19859  
Evolution IVGSR's Avatar
Evolved Member
iTrader: (42)
 
Joined: Dec 2006
Posts: 1,720
Likes: 1
From: Utah, SLC
Originally Posted by MPACT
I have tried each of the 3 USB ports on my laptop with similar results but maybe I will try a different machine. I am on v2.6b and I have only the basics logging and it is actually disconnecting. I can use ECUFlash ok it would seem but logging it cuts out. It isn't 100% of the time but it is quite often. Makes it really maddening to try and tune this thing if I can't get a FTL log!

I am in Cedar Hills (UT County) no Cedar City sorry
Hey a friend of mine has a cable So I could probably see if He can help out... He lives in Provo and Im in Orem so we are close to you
Old Jan 27, 2009 | 03:23 PM
  #19860  
Evolution IVGSR's Avatar
Evolved Member
iTrader: (42)
 
Joined: Dec 2006
Posts: 1,720
Likes: 1
From: Utah, SLC
Originally Posted by 33
Anybody interested in hitting up Hooter's Friday after work?
haha Man I wish I had money I would so be down Maybe I will have some spare money then lol I will be dropping my Car off at Courtney Greens for a tune that night so maybe..thats where the little money I have is going lol.. where is the hooters at up in SLC anyhow?



All times are GMT -7. The time now is 02:50 PM.