Buschur Racing 50 trim turbo kit......
I know, you can't see much but this is the best shot we can get of the turbo kit on the car. The nice thing is, it's pretty freaking stock looking. If the compressor housing wasn't polished you'd hardly notice it is in there. The wastegate actuator is behind the turbo between the turbo and the block. This makes a lot of room for a very thick large radiator.
I car should be able to get this on the dyno tomorrow. I'll have pump, pump+alky and probably race gas numbers on it then.
I car should be able to get this on the dyno tomorrow. I'll have pump, pump+alky and probably race gas numbers on it then.
Awww Dave, you said that yesterday!! Just joshin ya!
The actuator is a HD unit. I am verifying the actual PSI now.
It's funny how these threads go. Some say nobody cares about race gas so put a killer actuator on it then other all they want to know is what it makes on pump gas with a cat back etc., etc.
Bottom line is nothing is going to make everybody happy.
I can't do a turbo kit for under $2000 that uses a $400 wastegate on it, so this kit has an internal. If it's not what you want we offer a 50 trim kit that has the 44mm Tial external gate on it for $2995, that turbo is ballbearing too.
It's funny how these threads go. Some say nobody cares about race gas so put a killer actuator on it then other all they want to know is what it makes on pump gas with a cat back etc., etc.
Bottom line is nothing is going to make everybody happy.
I can't do a turbo kit for under $2000 that uses a $400 wastegate on it, so this kit has an internal. If it's not what you want we offer a 50 trim kit that has the 44mm Tial external gate on it for $2995, that turbo is ballbearing too.
Anyway you could use a 200$ tial 38mm gate and a non ball bearing turbo and weld the gate flange to the manifold? And then the o2 housing would be less involved. Would it be possible to keep the kit at 2000$???
Evolving Member
Joined: Jun 2005
Posts: 220
Likes: 0
From: Charleston, WV
Evolving Member
Joined: Jun 2005
Posts: 220
Likes: 0
From: Charleston, WV
hey dave, with the schedule i am working, i dont have much time to call you all. do you have any of the Powered By Buschur Racing valve covers in? is so, could you throw one on and add it to my bill? i am gonna try to give you a call friday. thanks, can't wait till tomorrow!