ROAD/RACE Piggyback VERSION 2
Originally Posted by drucea
did you you get the new one or the old one? cause the new one i got had instructions for auto and manual too but they were for the 2003 lancer. and when i called rrm, whoever i spoke to said it was the same and to just scratch out the vacuum line part. so i'm just waiting for the new instructions. but hey it learns off new mods like your stock ecu so even having it on a stock car helps a lot, and when you put stuff on later, you'll get more out of it.
Originally Posted by TeAmEmPeRoR
hmmm, well, just seems odd to me, cause I got my pb from RRM as well, and it actually came with both sets of instructions, one for auto's & one for manual's. Haven't installed mine yet, considering I don't have any mods on my car in the first place, and I don't think it it would be that much beneficial to put it on till I have some basic mods like intake, header or exhaust first. It's a long story why I have one, but I got one.....lol.
The instructions for the old are still applicable... only difference is the vacuum line.
Ensure you let the car sit at idle for at least 15 minutes... then drive it around nicely for about 100 miles before you start getting on it. The 04-05 ecu's do need to learn for a bit before the piggy takes full effect.
Ensure you let the car sit at idle for at least 15 minutes... then drive it around nicely for about 100 miles before you start getting on it. The 04-05 ecu's do need to learn for a bit before the piggy takes full effect.
Joined: Feb 2005
Posts: 2,914
Likes: 0
From: Central TX, Houston, and Huntville, TX
ok, i'll be mailing mine back today or tomorrow if my class runs too long. yeah the instructions are the same just ignore the vacuum line. I connected mine back last night just to make sure but it still misfires so its off now and packed up.
Joined: Feb 2005
Posts: 2,914
Likes: 0
From: Central TX, Houston, and Huntville, TX
what is? if its about one POSSIBLY messing up, thats how it goes, and they told me to just mail it back and we'll get things figured out. I'm completely happy with that. as long as i get a good product and coming from rrm i'm sure everything will be fine.
occasionally a box goes out and it either didn't accept the programming or isn't working properly. That's electronics for you... hell in shipping it could have been tossed a few times. In the end RRM stands behind the product fully and asked him to ship it back for testing. A new one will be sent out to him if the box is proven bad... if it's good then we need to delve deeper into his install/car issues.
As for now it appears the box is a problem. So it's coming back. Other boxes have been installed and are working with no reported issues.
As for now it appears the box is a problem. So it's coming back. Other boxes have been installed and are working with no reported issues.