COBB AccessTUNER Pro for 2008 EVO X (merge)
Evolving Member
Joined: Feb 2008
Posts: 114
Likes: 0
From: Bham, AL
You can change the number of posts per page in your User CP.. Your page 20 is my page 7. Food for thought.
by the way, we are on "page" 20 of this "thread". you can easily navigate through "threads" by clicking on certain "page" numbers.
You can change the number of posts per page in your User CP.. Your page 20 is my page 7. Food for thought.
Tomorrow I will make sure ALL the maps are up to date including the maps from the website. I know 100% the stage maps on the AP after the 1.3.1.0 update have what is needed. If the maps on the website are old, please use the AP manager to pull them off the AP. The staged maps from the AP should fill in and try flashing one of those.
For example, use AP manager to pull Stage I 91 Octane off the AP. Plug the AP into the car and flash the Stage 1 91 Octane which should always be on the AP by default.
A little info. As of current, our updater will update the included stage maps, but not the maps placed on by a user such as custom tunes.
For example, use AP manager to pull Stage I 91 Octane off the AP. Plug the AP into the car and flash the Stage 1 91 Octane which should always be on the AP by default.
A little info. As of current, our updater will update the included stage maps, but not the maps placed on by a user such as custom tunes.
So it sounds like I need updated maps? I will check the website later in the day.
Last edited by Q15H; Jan 21, 2009 at 12:36 PM.
Evolving Member
Joined: Dec 2008
Posts: 104
Likes: 0
From: Calgary/Edmonton, AB
1.3.1.0 is the current version we have released even though the website says 1.3.0.4. Our web guru will be taking care of putting up the AccessTuner Race links today along with changing the description of the current AP firmware.
Like I said in my previous post I wanted to let all of you get the firmware last night, but we would not be updating the descriptions until sometime today
Like I said in my previous post I wanted to let all of you get the firmware last night, but we would not be updating the descriptions until sometime today
We all understand that Cobb is a small company, with huge demands on your time and resources due to the huge popularity of the Accessport, but, we're all extremely anxious to have this info, Accesstuner Race, and the Intake maps that have been in the works for quite some time...
Could you please let us know the status? Thanks!
Evolving Member
Joined: Oct 2007
Posts: 260
Likes: 1
From: SLC, UT
The Evo X maps on our website are updated. If you are having issues with live data stating you need to relfash the ECU, please download a new map (same version, no tuning changes) and reflash your ECU with the new map.
Thanks,
Thanks,
Last edited by Rob@cobbtuning; Jan 21, 2009 at 10:29 AM. Reason: Hacking skill != grammer :(
Evolving Member
Joined: Oct 2007
Posts: 260
Likes: 1
From: SLC, UT
I think "today" was yesterday... I just checked the website again, and I couldn't see the release notes or anything...
We all understand that Cobb is a small company, with huge demands on your time and resources due to the huge popularity of the Accessport, but, we're all extremely anxious to have this info, Accesstuner Race, and the Intake maps that have been in the works for quite some time...
Could you please let us know the status? Thanks!
We all understand that Cobb is a small company, with huge demands on your time and resources due to the huge popularity of the Accessport, but, we're all extremely anxious to have this info, Accesstuner Race, and the Intake maps that have been in the works for quite some time...
Could you please let us know the status? Thanks!
Please follow this link and follow the instructions. http://www.cobbtuning.com/info/?id=4214
We're working a quickly as we can on the intake maps. Heck, we're just finishing up the Stg II. Keep in mind we are not tuning for one vehicle, it's Evo X's all over the US. We take great care in what tunes we release making sure they are good for the customer. Please be patient with the tuning.
Thanks,
1-download map
2-import map into AP manager
3-connect AP
4-drag and drop map from AP library to AP
5-reflash ECU
Evolving Member
Joined: Oct 2007
Posts: 260
Likes: 1
From: SLC, UT
Evolved Member
Joined: May 2008
Posts: 510
Likes: 0
From: Oklahoma City
If this is true, will Cobb be providing or selling the pill for existing AP user? Im not sure if there are different pill sizes out there.
Also, how/where exactly does the pill installed?
Also, how/where exactly does the pill installed?
AccessPort AccessTuner software is available
Edit: This is the AccessTuner Race edition
Kinda like ECUFlash for the AP from what I understand.
Who's going to be the guinea pig?
http://forums.cobbtuning.com/forums/...ad.php?t=45294
Kinda like ECUFlash for the AP from what I understand.
Who's going to be the guinea pig?
http://forums.cobbtuning.com/forums/...ad.php?t=45294
So I suppose you need to have a laptop to run this program, and for every changes you make on the map, you will have to upload back to the AP and then flash it to the ECU.
Works like a ECU flash, but a few extra steps in between.
I will have to try it out at my next dyno session.
Works like a ECU flash, but a few extra steps in between.
I will have to try it out at my next dyno session.