Evo X Boost Gauge Install ,No splicing, No firewall drilling,Pics+Vid= Clean As Hell
#66
Evolving Member
iTrader: (3)
Join Date: Aug 2008
Location: UAE: Abu Dhabi
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
I need help with Prosport gauge in the following thread, anyone plz
https://www.evolutionm.net/forums/ev...er-wiring.html
https://www.evolutionm.net/forums/ev...er-wiring.html
#69
Evolving Member
Join Date: Dec 2008
Location: Richmond, va
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
#72
Evolving Member
iTrader: (4)
Join Date: Sep 2008
Location: maimi
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Standalone is electrical. It requires no control unit. And comes with a sensor box just for the gauge alone a small black box which a sensor wire runs from the gauge to the sensor box then the boost tube runs from the sensor box to the boost tap in. Not a standalone electrical gauge will require the use of a control box you can usually search it.
Non-standalone is nice as all the sensors run from the control unit and the gauges can link to each gauge then route to the control unit. You basically can hook up a boost, egt, temp together then only run one wire to the control unit and all three gauges will read from their own sensor in the control unit. Can also record and playback everything. Also can set up warnings on every gauge and buzz at you when something is going beyond its point. Sorry if you already knew this i got carried away
HOW MANY GAUGES ARE EASY TAPable IN OUR EVO X?
ANY GENERAL GRAPHIC SHOWING FROM WHERE TAP EACH ONE?
#74
Evolving Member
iTrader: (4)
Join Date: Sep 2008
Location: maimi
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
you shyong need some spank!
i hope you just call people idiot behind a computer.
anyway....
so... that russian piece of crap interior looks to you like a ferrari?
would you really like to wrap around our beatifull interior with stupid leather?
i hope you just call people idiot behind a computer.
anyway....
so... that russian piece of crap interior looks to you like a ferrari?
would you really like to wrap around our beatifull interior with stupid leather?
#75
Evolving Member
iTrader: (4)
Join Date: Sep 2008
Location: maimi
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
i found these:
http://roadraceengineering.com/evox/...-ecuwiring.htm
does anybody have some pictures of defi control unit sensors taping the ECU? do we need any wiring mesh?
http://roadraceengineering.com/evox/...-ecuwiring.htm
does anybody have some pictures of defi control unit sensors taping the ECU? do we need any wiring mesh?