***ECUFlash Now For Base Lancers!***
EVENING LOG
Click here for my evening log with 450 injector scaling. I did a few 2nd, 3rd, and 4th gear pulls in this log.
It is in CSV, so right-clicking and selecting "Save Link As" and opening in Excel will make it a little easier to read
Also the rom I used along with the Read Image are attached. Last edited by wickdaddy; Feb 28, 2007 at 02:46 PM. Reason: attached rom and image
I don't get a lot of this. With several of the maps you have posted it jumps from 14.7's AFR under low RPM/load to ~ low 11's under high load/RPM. The stoich fuel mixture of our cars is around 13 AFR's as tested by RRM. On my car, piggybacks a 14.7 would trigger a lean code. Low 11's are what it is factory. I do believe something is wrong or people just don't know how to tune their cars. At idle you should be low 14's and everywhere else low 13's. That generates the most power for an NA lancer.
I don't get a lot of this. With several of the maps you have posted it jumps from 14.7's AFR under low RPM/load to ~ low 11's under high load/RPM. The stoich fuel mixture of our cars is around 13 AFR's as tested by RRM. On my car, piggybacks a 14.7 would trigger a lean code. Low 11's are what it is factory. I do believe something is wrong or people just don't know how to tune their cars. At idle you should be low 14's and everywhere else low 13's. That generates the most power for an NA lancer.
I'm around 18-20 at idle and about 14.3 just crusing. the tune that it is at is not perfect, but it is definately not an NA tune
Joined: Feb 2005
Posts: 2,914
Likes: 0
From: Central TX, Houston, and Huntville, TX
OK, I finally gave my car another try with this cable. It read my ecu but I can't see these tables like everyone is posting. But I did save the rom. Any idea what I can do about it? I think this means I don't have the correct definition files or something like that.
Newbie
Joined: Sep 2006
Posts: 73
Likes: 0
From: monterey
^is it the correct file??
im pretty sure that is it. what does defining the file actually entail?id like to learn and maybe help out if at all possible, if not, the not being that it is ridiculously complicated, then im pretty sure it would be better to leave to you guys anyway. haha.thanks.
Thread Starter
Evolved Member
iTrader: (115)
Joined: Dec 2003
Posts: 2,295
Likes: 4
From: Albuquerque, NM
That file will work. Making the definition file is mostly interpreting HEX code. If you'd like to learn more about what a definition file is, check out the forums at openecu.org. That is the major support site for ECUFlash, the Tactrix cable and even EVOScan.
I was interested in this last night and while I have no problems with Evo .hex for some reason I cant get any of the ROMs you have posted up to work. I have all the listed definition files (I am running EF 1.30) but for some reason nothing is readable. Ideas as to what I am doing wrong?
JB
JB
