Notices
Northeast Region Includes CT, MA, ME, NH, NJ, NY, PA, RI, VT.

Philadelphia's Classiest Drunkards

Thread Tools
 
Search this Thread
 
Old Apr 1, 2010 | 11:30 AM
  #2506  
AlwaysinBoost's Avatar
Evolved Member
iTrader: (17)
 
Joined: Aug 2004
Posts: 3,275
Likes: 0
From: In da streetz
Originally Posted by PeteyTurbo@KHC
I was running 12.1@112 that day he was going 12.0@113 that day but ran 12.4 to my 12.2 lol
I've got a couple slips from the last time I was at the track and I think they're against him. I was in the 12.2-12.0 range and he was a pretty consistant 12.1-12.0... damn those stalled autos.
Old Apr 1, 2010 | 11:32 AM
  #2507  
dek0026's Avatar
Evolved Member
 
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
^ pete i seriously have to get you a sample from the station i use as there are a few guys wanting to convert.

i went out for a drive today and i got to say that it run and pulls nicely with what is in the tank and it doesn't smell like pump gas much anymore.

i (josh) got my gauges in working order and the boost and afr are dead on.

i think i am going to go with an A pillar pod for my gauges. i can't stand the pod i have now. here is a picture. they're just placed in there and nothing is bolted down but i just hate it.

Old Apr 1, 2010 | 11:36 AM
  #2508  
grillpt's Avatar
Evolved Member
iTrader: (24)
 
Joined: Mar 2007
Posts: 2,680
Likes: 5
From: 610
Wassup everyone?

My first post from the new crib! Verizon just left and after some major issues including having to cut big holes on brandnew drywall I have FIOS. I also only have one good phone jack in the entire house, luckly its in the kitchen and it looks I'll be getting a multi-pack cordless phone...

Move in day tomorrow, hopefully all goes well.

Shaw, be careful in there...
Old Apr 1, 2010 | 11:38 AM
  #2509  
grillpt's Avatar
Evolved Member
iTrader: (24)
 
Joined: Mar 2007
Posts: 2,680
Likes: 5
From: 610
Dan, same issues I have with mine, can't see your instruments... problem with a-pillar pods are they hinder your vision in left turns. I had one of them first...
Old Apr 1, 2010 | 11:41 AM
  #2510  
PeteyTurbo@KHC's Avatar
Former Sponsor
iTrader: (1)
 
Joined: Sep 2009
Posts: 391
Likes: 0
From: Philly, Jersey
some may hate it, but I think it is easy to read an conveinent, nice gauges make it better too..


You can even get them with carbon fiber faceplate for 12.00 extra.. LMK if u need one Danimal, I am the best at spending other peoples money!

Last edited by PeteyTurbo@KHC; Apr 1, 2010 at 11:47 AM.
Old Apr 1, 2010 | 11:48 AM
  #2511  
PeteyTurbo@KHC's Avatar
Former Sponsor
iTrader: (1)
 
Joined: Sep 2009
Posts: 391
Likes: 0
From: Philly, Jersey
Originally Posted by dek0026
^ pete i seriously have to get you a sample from the station i use as there are a few guys wanting to convert.

i went out for a drive today and i got to say that it run and pulls nicely with what is in the tank and it doesn't smell like pump gas much anymore.

i (josh) got my gauges in working order and the boost and afr are dead on.

i think i am going to go with an A pillar pod for my gauges. i can't stand the pod i have now. here is a picture. they're just placed in there and nothing is bolted down but i just hate it.

Did you install the revised map I sent for better cold start? How did it work?
Old Apr 1, 2010 | 11:50 AM
  #2512  
dek0026's Avatar
Evolved Member
 
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
^pete i saw that one. i can't say i like it. seems huge. i am also not a fan of the one that mounts under the a/c controls. how are you supposed to see that?
Old Apr 1, 2010 | 11:52 AM
  #2513  
dek0026's Avatar
Evolved Member
 
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
Originally Posted by PeteyTurbo@KHC
Did you install the revised map I sent for better cold start? How did it work?
oh man. i didn't notice that you attached that. i thought your email said you were going to work on it.

i will give it a try. my cold starts aren't the issue. i wasn't clear in my email. i meant it idles really low when starting up (after it's been warmed up....like restarting). sorry to make you go and do work like that. i'll run it and see if there is a difference with cold starts.
Old Apr 1, 2010 | 11:54 AM
  #2514  
xpehbam's Avatar
Evolving Member
iTrader: (7)
 
Joined: Jul 2007
Posts: 163
Likes: 0
From: Philadelphia, PA
Petey, I know you've been busy, but how is v7 map coming?
Old Apr 1, 2010 | 11:57 AM
  #2515  
Kevin.'s Avatar
EvoM Community Team Leader
15 Year Member
Photogenic
Liked
Community Favorite
iTrader: (7)
 
Joined: Oct 2009
Posts: 768
Likes: 148
From: PHL
Originally Posted by dek0026
I thought you meant wideband when you were talking about the A/F gauge you got.

They still make those things?
Old Apr 1, 2010 | 11:57 AM
  #2516  
xpehbam's Avatar
Evolving Member
iTrader: (7)
 
Joined: Jul 2007
Posts: 163
Likes: 0
From: Philadelphia, PA
I need a new lower radiator hose and wondering what to get.

Which one you think is the best?

http://www.extremepsi.com/store/cust...0VIII%20&%20IX

http://www.extremepsi.com/store/cust...0VIII%20&%20IX

Or a set of stockers?

Last edited by xpehbam; Apr 1, 2010 at 12:00 PM.
Old Apr 1, 2010 | 12:04 PM
  #2517  
dek0026's Avatar
Evolved Member
 
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
Originally Posted by Kevin.
I thought you meant wideband when you were talking about the A/F gauge you got.

They still make those things?
that's the aem uego
Old Apr 1, 2010 | 12:12 PM
  #2518  
turbotekray's Avatar
Evolving Member
iTrader: (12)
 
Joined: Jul 2006
Posts: 166
Likes: 0
From: Pittsfield/philly
So anyone have an update on Mc Lovins situation? and for crying out loud shaw seems like everything you touch breaks
Old Apr 1, 2010 | 01:06 PM
  #2519  
AlwaysinBoost's Avatar
Evolved Member
iTrader: (17)
 
Joined: Aug 2004
Posts: 3,275
Likes: 0
From: In da streetz
^ dunno... I sent him a PM but haven't heard anything...
Old Apr 1, 2010 | 01:07 PM
  #2520  
dek0026's Avatar
Evolved Member
 
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
is it an april fools joke?



All times are GMT -7. The time now is 01:42 AM.