Notices

List of Important Threads

Old Nov 3, 2013, 01:25 AM
  #1  
EvoM Moderator
Thread Starter
 
Burtonrider1002's Avatar
 
Join Date: Feb 2012
Location: Milwaukee, WI
Posts: 1,177
Received 14 Likes on 13 Posts
List of Important Threads

Recalls, Safety, & Reviews

Outlander Sport Recals

Mitsubishi recalls Outlander Sport vehicles for several issues

2013 Mitsubishi Outlander Sport Awarded Insurance Institute for Highway Safety (IIHS)

Outlander Sport VIDEO Reviews

Diagonal Test

Outlander Sport Temp Drives

Airbag system service required!?





Suspension

IMPORTANT INFO: End Links and Outer Tie Rod Info

Confirmed Outlander Sport/RVR/ASX Lowering

Air Intake & Upper Strut Bar

Outlander Sport (RVR/ASX) : Wheel Alignment

Its been an amazing last 2 weeks... and more to come...





Engine & Mechanical

4WD System Info

IMPORTANT INFO: CVT Supercharger-like whine in manual mode

'13 LE engine balancer

AWD modes




Basic Maintenance

2012 Software Reflash on a 2011 Outlander Sport

Bulb size chart (LED ready)

Basic Maintenance Items: Outlander Sport (ASX/RVR)

CVT Maintenance - Before and After fluid change

Highbeam adjustment?





Tuning & Modifications

Outlander Sport Mods

2011 Outlander Sport - Dyno Sheet!

2013 Aluminum Crank Pulley install. detailed.

Outlander Sport with Lancer CAI SP1835

Outlander Sport ECU Flash & EvoScan Definitions

New INJEN Short Ram Intake for Outlander Sport/RVR 2.0L

Questions about tuning?

Official Outlander Sport Mod List!!





Exterior, Appearance, & Aesthetics

Anyone Want New Side Mirrors?

DIY: Advanced Angel Eyes (DRLs) - Outlander Sport

How to fish rear view camera to head unit

A few small LED additions

Outlander Sport (RVR) HID Kit

2013 Hitch install w/ pics

Philips H11 CrystalVision Ultra Headlight Bulb





Wheels & Tires

Winter wheel/tire combos

Tire Size Specs

Time for new tires!





Interior

Semi-Custom Leatherette Seat Covers

DIY: Interior Trim Vinyl Wrap

Blue Ridge Overland Gear

Zombie Outbrake Response Team







Recommended threads, suggestions, comments, and concerns can be stated below!

Please keep in mind this is a long way from finished

Last edited by Burtonrider1002; Sep 6, 2016 at 01:50 PM. Reason: Fixed all the link names, no idea why they were all broken...
The following users liked this post:
Alexman2525 (Sep 2, 2016)
Old Sep 2, 2016, 10:24 AM
  #2  
Newbie
iTrader: (1)
 
Alexman2525's Avatar
 
Join Date: Aug 2005
Posts: 92
Received 11 Likes on 10 Posts
The links are not working for me, they all bring me to a "The requested page was not found." page.
Old Sep 6, 2016, 01:53 PM
  #3  
EvoM Moderator
Thread Starter
 
Burtonrider1002's Avatar
 
Join Date: Feb 2012
Location: Milwaukee, WI
Posts: 1,177
Received 14 Likes on 13 Posts
Originally Posted by Alexman2525
The links are not working for me, they all bring me to a "The requested page was not found." page.
Somehow the "l" in "html" was removed at the end of every link. How the hell that could even happen, I don't know.

Thanks for letting me know, they should all be fixed now.
Old Nov 4, 2020, 09:51 AM
  #4  
Newbie
iTrader: (1)
 
Alexman2525's Avatar
 
Join Date: Aug 2005
Posts: 92
Received 11 Likes on 10 Posts
My service reminder was acting strange, I finally found some info on a different forum on how to change or deactivate the service reminder. I think it would be useful here.

Some useful info from the service manual - here is how to reset your Service Reminder, Change the Maintenance Schedule (factory default is 6 months/7,500 miles but those of us requiring the "Severe Maintenance" schedule can change it as outlined below), or inactivate it altogether:

HOW TO CANCEL THE SERVICE REMINDER WARNING

1. Turn the ignition switch to the "OFF" position.
2. By operating the meter information switch, the warning period is displayed on the multi information display.
3. Press the meter information switch once for 1.2 seconds or longer.
4. The service reminder indicator flashes.
5. While the service reminder indicator flashes, press the meter information switch once for less than 1.2 seconds.
6. The service reminder indicator is turned ON, and "CLEAR" is displayed on the multi-information display for 3 seconds.
7. After "CLEAR" is displayed for 3 seconds, the warning period to the next time is displayed.

HOW TO SET THE SCHEDULE
1. Turn the ignition switch to the "OFF" position.
2. By operating the meter information switch, the warning period is displayed on the multi information display.
3. Press the meter information switch once for 1.2 seconds or longer.
4. The service reminder indicator flashes.
5. While the service reminder indicator flashes, press the meter information switch 3 times consecutively for 1.2 seconds or longer.
6. The service reminder indicator is turned ON, and the current schedule is displayed on the multi information display.
7. While the current schedule is displayed, press the meter information switch 3 times consecutively for less than 1.2 seconds.
8. The multi information display is shifted to the schedule selection mode.
9. When the meter information switch is pressed for less than 1.2 seconds, the schedule is shifted, and when the switch is pressed for 1.2 seconds or longer, the displayed schedule is set.
10. The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.

ScheduleWarning types Warning criteria
NAS 10 (initial setting) Elapsed time (month) Every 6 elapsed months
Driving distance (miles) Every 7,500 miles of driving distance
Driving distance (km) Every 12,000 km of driving distance

NAS 11 Elapsed time (month) Every 3 elapsed months
Driving distance (miles)Every 3,750 miles of driving distance
Driving distance (km) Every 6,000 km of driving distance

NAS 20 Elapsed time (month) Every 5 elapsed months
Driving distance (miles) Every 5,000 miles of driving distance
Driving distance (km) Every 8,000 km of driving distance

NAS 21 Elapsed time (month) Every 4 elapsed months
Driving distance (miles) Every 3,750 miles of driving distance
Driving distance (km) Every 6,000 km of driving distance

HOW TO INACTIVATE THE SERVICE REMINDER
FUNCTION

By setting to "OFF Display" or "Function OFF" when the schedule is set, the service reminder function can be inactivated.

When "OFF Display" is selected
_ Even when the check warning period is reached, the service reminder display is not displayed.
_ Even if the service reminder screen is displayed by the meter information switch
operation, "OFF" is displayed.

When "Function OFF" is selected
_ Even when the check warning period is reached, the service reminder display is not displayed.
_ Even with the meter information switch operation, the service reminder screen is not displayed.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JG853
Midwest Region
0
Aug 5, 2020 10:12 AM
RussellM
Northwest Region
218
Aug 19, 2010 08:14 AM
Evogelion
Northwest Region
12
Dec 5, 2006 04:35 PM
DEVO330
South Region
108
Aug 24, 2005 09:00 PM


Thread Tools
Search this Thread
Quick Reply: List of Important Threads



All times are GMT -7. The time now is 08:14 AM.